Saturn 2007 Vue Especificações descarregar pdf (Página 278)

100

101

4. At the wall measure from the ground upward (A) to

the recorded distance from Step 3 and mark it.

5. Draw or tape a horizontal line (B) on the wall the

width of the vehicle at the height of the mark in

Step 4.

Notice: Do not cover a headlamp to improve beam

cut-off when aiming. Covering a headlamp may

cause excessive heat build-up which may cause

damage to the headlamp.

6. Turn on the low-beam headlamps and place a

piece of cardboard or equivalent in front of the

headlamp not being adjusted. This allows only the

beam of light from the headlamp being adjusted

to be seen on the ﬂat surface.

7. Locate the vertical headlamp aiming screws, which

are under the hood near each headlamp assembly.

The adjustment screw can be turned with a

E8 Torx

socket.

8. Turn the vertical aiming screw until the headlamp

beam is aimed to the horizontal tape line. Turn it

clockwise or counterclockwise to raise or lower the

angle of the beam.

5-40

1 2 ... 273 274 275 276 277 278 279 280 281 282 283 ... 383 384

Comentários a estes Manuais

Sem comentários

Saturn 2007 Vue Especificações Página 278

Comentários a estes Manuais

Manuais e produtos relacionados com Alarmes para automóveis Saturn 2007 Vue